|
|
HELLO! BOOT0 is starting!
boot0 version : 4.2.0
boot0 commit : c8c201b51b7ea1baa94590a1887313124d9a5879
fel_flag = 0x00000000
rtc[0] value = 0x00000000
rtc[1] value = 0x00000000
rtc[2] value = 0x00000000
rtc[3] value = 0x0000000f
rtc[4] value = 0x00000000
rtc[5] value = 0x00000000
rtc[6] value = 0x00000000
rtc[7] value = 0x00000000
DRAM DRIVE INFO: V1.4
the chip id is 0x00000081
the chip id is 0x00000081
the chip id is 0x00000081
the chip id is 0x00000081
the chip id is 0x00000081
NOT GATE MODE
READ DQS LCDL = 00232323
DRAM Type = 3 (2undefinedDR2,3undefinedDR3,6undefinedPDDR2,7undefinedPDDR3)
DRAM CLK = 576 MHz
DRAM zq value: 003b3bfb
DRAM dram para1: 10e40200
DRAM dram para2: 00000000
DRAM workmode1: 000009f4
DRAM SIZE =512 M
odt delay
dram size =512
card boot number = 2
card no is 2
sdcard 2 line count 8
[mmc]: mmc driver ver 2015-04-13 16:07:39
[mmc]: ***Try SD card 2***
[mmc]: mmc 2 cmd 8 err 00000100
[mmc]: mmc 2 cmd 8 err 00000100
[mmc]: mmc 2 send if cond failed
[mmc]: mmc 2 cmd 55 err 00000100
[mmc]: mmc 2 cmd 55 err 00000100
[mmc]: mmc 2 send app cmd failed
[mmc]: ***Try MMC card 2***
[mmc]: mmc re-update_phase
[mmc]: mmc re-update_phase
[mmc]: 8bit ddr!!!
[mmc]: mmc re-update_phase
[mmc]: MMC ver 5.0
[mmc]: SD/MMC Card: 8bit, capacity: 7376MB
[mmc]: vendor: Man 00f40122 Snr 1000000c
[mmc]: product: Biwin
[mmc]: revision: 2.0
[mmc]: ***SD/MMC 2 init OK!!!***
sdcard 2 init ok
The size of uboot is 000e4000.
sum=721d55ab
src_sum=721d55ab
set_mmc_para,sdly 50M 0
set_mmc_para,sdly 25M 0
Succeed in loading uboot from sdmmc flash.
Ready to disable icache.
Jump to secend Boot.
SUNXI_NORMAL_MODE
[ 0.294]e mode
U-Boot 2011.09-rc1-00024-gdbed064 (Nov 30 2015 - 20:18:20) Allwinner Technology
[ 0.303]version: 1.1.0
[ 0.305]uboot commit : dbed064f3b1a936e4e374a6284944f4e4e30e9ae
not using multi config
normal mode
[ 0.319]pmbus: ready
not set main pmu id
axp_probe error
[board_vendor] vid_used not used
[ 0.358]PMU: pll1 1008 Mhz,PLL6=600 Mhz
AXI=336 Mhz,AHB=200 Mhz, APB1=100 Mhz
sid read already
fel key new mode
run key detect
no key found
no key input
dram_para_set start
dram_para_set end
normal mode
[ 0.389]DRAM: 512 MiB
relocation Offset is: 15af1000
[box standby] read rtc = 0xf
[box_start_os] mag be start_type no use
user_gpio config
user_gpio ok
gic: normal or no secure os mode
workmode = 0
MMC: 2
[ 0.469][mmc]: mmc driver ver 2015-06-1 20:01:00
[ 0.474][mmc]: get sdc_phy_wipe fail.
[ 0.478][mmc]: get sdc0 sdc_erase fail.
[ 0.482][mmc]: get sdc_2xmode ok, val = 1
[ 0.486][mmc]: get sdc_ddrmode ok, val = 1
[ 0.490][mmc]: get sdc_f_max fail,use default 50000000Hz
[ 0.496][mmc]: get card_line ok, card_line = 8
[ 0.500][mmc]: get sdc_ex_dly_used fail,use default
[ 0.505][mmc]: SUNXI SD/MMC: 2
[ 0.519][mmc]: *Try SD card 2*
[ 0.522][mmc]: mmc 2 cmd 8 err 100
[ 0.528][mmc]: mmc send if cond failed
[ 0.532][mmc]: mmc 2 cmd 55 err 100
[ 0.537][mmc]: send app cmd failed
[ 0.540][mmc]: *Try MMC card 2*
[ 0.594][mmc]: mmc re-update_phase
[ 0.599][mmc]: mmc re-update_phase
[ 0.608][mmc]: mmc re-update_phase
[ 0.614][mmc]: ddr8
[ 0.616][mmc]: mmc re-update_phase
[ 0.634][mmc]: CID 0xf4012242 0x6977696e 0x20100000 0xcd923e3
[ 0.639][mmc]: MMC ver 5.0
[ 0.642][mmc]: mmc clk 50000000
[ 0.645][mmc]: SD/MMC Card: 8bit, capacity: 7376MB
[ 0.650][mmc]: boot0 capacity: 4000KB,boot1 capacity: 4000KB
[ 0.656][mmc]: ***SD/MMC 2 init OK!!!***
[ 0.661][mmc]: erase_grp_size:0x400WrBlk * 0x200 = 0x80000 Byte
[ 0.667][mmc]: secure_feature 0x55
[ 0.670][mmc]: secure_removal_type 0x9
[ 0.674]sunxi flash init ok
script config pll_de to 864 Mhz
Not Found clk pll_video1 in script
script config pll_video to 297 Mhz
script config pll_periph0 to 600 Mhz
[boot]disp_init_tv
[DISP_TV] disp_init_tv enter g_tv_used
screen 0 do not support TV TYPE!
[BOOOT_DISP_TV] disp tv device_registered
unable to find regulator vcc-hdmi-18 from [pmu1_regu] or [pmu2_regu]
enable power vcc-hdmi-18, ret=-1
DRV_DISP_Init end
read byte = 11
read byte = 8
[get_display_resolution] = 405
read byte = 8
boot_disp.auto_hpd=1
auto hpd check has 0 times!
attched ok, mgr0<-->device0, type=4, mode=5----
ready to set mode
[ 1.562]finally, output_type=0x4, output_mode=0x5, screen_id=0x0, disp_para=0x405
In: serial
Out: serial
Err: serial
--------fastboot partitions--------
-total partitions:13-
-name- -start- -size-
bootloader : 1000000 1000000
env : 2000000 1000000
boot : 3000000 1000000
system : 4000000 3c000000
misc : 40000000 1000000
recovery : 41000000 2000000
private : 43000000 1000000
Reserve0 : 44000000 1000000
klog : 45000000 1000000
Reserve1 : 46000000 2000000
Reserve2 : 48000000 1000000
cache : 49000000 28000000
UDISK : 71000000 0
-----------------------------------
base bootcmd=run setargs_nand boot_normal
bootcmd set setargs_mmc
key 0
cant find rcvy value
cant find fstbt value
misc partition found
to be run cmd=run setargs_mmc boot_normal
read item0 copy0
the secure storage item0 copy0 is good
name in map mac
the secure storage item1 copy0 is good
Don't need to decrypt object
updataed mac = D8-96-E0-CE-B1-1C
name in map wifi_mac
the secure storage item3 copy0 is good
Don't need to decrypt object
updataed wifi_mac = 18-82-19-37-6E-09
no item name bt_mac in the map
sunxi storage read fail
name in map specialstr
the secure storage item2 copy0 is good
Don't need to decrypt object
updataed specialstr = 0061
no item name serialno in the map
sunxi storage read fail
check user data form private
WORK_MODE_BOOT
adver not need show
sunxi_bmp_logo_display
f_read btr over hd12896
read byte = 2764856
[ 1.764]screen_id =0, screen_width =1280, screen_height =720
[ 1.769]frame buffer address 46400036
[ 1.773]Hit any key to stop autoboot: 0
read boot or recovery all
[ 1.956]sunxi flash read undefinedffset 3000000, 13325584 bytes OK
[ 1.964]ready to boot
board_display_setenv: disp_para=405 init_disp=20b0405 tv_vdid=20a38800
[ 1.973][mmc]: mmc exit start
[ 1.989][mmc]: mmc 2 cmd 8 err 100
[ 1.994][mmc]: mmc send if cond failed
[ 1.998][mmc]: mmc 2 cmd 55 err 100
[ 2.003][mmc]: send app cmd failed
[ 2.015][mmc]: get sdc_phy_wipe fail.
[ 2.019][mmc]: get sdc0 sdc_erase fail.
[ 2.023][mmc]: get sdc_2xmode ok, val = 1
[ 2.027][mmc]: get sdc_ddrmode ok, val = 1
[ 2.031][mmc]: get sdc_f_max fail,use default 50000000Hz
[ 2.036][mmc]: get card_line ok, card_line = 8
[ 2.041][mmc]: get sdc_ex_dly_used fail,use default
[ 2.046][mmc]: mmc 2 exit ok
[ 2.049]
Starting kernel ...
[sun8i_fixup]: From boot, get meminfo:
Start: 0x40000000
Size: 512MB
ion_carveout reserve: 160m@0 300m@0 130m@1 200m@1
ion_reserve_select: ion chipid [0x2c00081!
ion_reserve_common: ion reserve: [0x56000000, 0x60000000]!
[ 0.750075] ls_fetch_sysconfig_para: type err device_used = -1063782284.
[ 0.758019] [RTC] WARNING: Rtc time will be wrong!!
[ 0.763508] [RTC] WARNING: use *internal OSC* as clock source
[ 0.772813] [cpu_freq] ERR:get cpu extremity frequency from sysconfig failed, use max_freq
[ 0.796128] sunxi_oops: heming add OOPS_INFO_ADDR = -20
[ 1.335982] ths_fetch_sysconfig_para: type err device_used = 1.
[ 1.351082] init: init proc start
[ 1.359197] init: could not import file '/init.debug.rc' from '/init.sun8i.rc'
[ 1.367528] init: ***************************LOW MEM DEVICE DETECT
[ 1.374229] init: *******************************add swapon_all success
[ 1.381596] init: *******************************add write success
[ 1.446437] init: open path: /dev/bus/usb/001/001
[ 1.572218] init: start e2fsck listening...
[ 1.611332] init: open path: /dev/bus/usb/002/001
[ 1.753846] init: open path: /dev/bus/usb/003/001
[ 1.901142] init: open path: /dev/bus/usb/004/001
[ 2.576833] init: C_IN_START
[ 2.579886] init: path = /dev/block/by-name/cache
[ 3.585339] init: C_IN_START
[ 3.588356] init: path = /dev/block/by-name/UDISK
[ 4.127623] fs_mgr: Unable to open zram conf device /sys/block/zram0/disksize
[ 4.135775] init: defined DONT_SHOW_INITLOGO
[ 4.141432] init: /sys/class/switch/cvbs/state is exist
[ 4.141833] init: dont need format /dev/block/by-name/private
[ 4.153722] init: The device is low memory 495
[ 4.211827] Failed to get mali parameter!
[ 4.265116] init: get_disp_policy: 1 for modify configs.
[ 4.299202] healthd: Could not open /sys/class/power_supply
[ 4.305664] healthd: No charger supplies found
[ 4.359778] init: single_display_policy exit@@@@@@
[ 4.381185] init: untracked pid 104 exited
[ 4.387543] android_usb: already disabled
[ 4.392292] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
[ 4.403278] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
root@dolphin-fvd-p1-YD:/ # [ 15.117303] init: sys_prop: permission denied uid:1003 name:service.bootanim.exit
[ 24.859569] EXT4-fs error (device mmcblk0p1) in ext4_new_inode:899: IO failure
[ 24.868443] Aborting journal on device mmcblk0p1-8.
[ 24.874627] EXT4-fs (mmcblk0p1): Remounting filesystem read-only
[ 24.886690] EXT4-fs error (device mmcblk0p1) in ext4_create:1772: IO failure
[ 30.161218] init: untracked pid 1104 exited
130|root@dolphin-fvd-p1-YD:/ #
|
上一篇： 求助：求一款可以在線輔導孩子學習的軟件1年級--6年級的下一篇： 給憶典s4超精簡卡刷包，迪優(yōu)美特系統(tǒng)移植版
|
網(wǎng)站導航
發(fā)表于 2016-7-12 14:35
收藏
淘帖
頂一個
踩
提升卡
置頂卡
變色卡
千斤頂
樓主
znds.com 