中興ZXV10B860AV1.1 ms09280碼跑到時這里就不跑

lkus · 發表于 2022-11-18 09:47

中興ZXV10B860AV1.1 ms09280碼跑到時這里就不跑請大神們指點一下

[ERROR] vfs_read:523: ext4load mmc fail
[ERROR] DecodeFile:757: Fail: Load_Photo2Dram return size is 0 !!
mmc change mount : tvcustomer
Size of file "/1080.jpg" from mmc device 0 partition tvcustomer: -1 bytes
Loading file "/1080.jpg" at offset 0x0 from mmc device 0 partition tvcustomer
** File not found /1080.jpg **
[ERROR] vfs_read:523: ext4load mmc fail
[ERROR] DecodeFile:757: Fail: Load_Photo2Dram return size is 0 !!
mmc change mount : tvcustomer
Size of file "/NTSC.jpg" from mmc device 0 partition tvcustomer: -1 bytes
Loading file "/NTSC.jpg" at offset 0x0 from mmc device 0 partition tvcustomer
** File not found /NTSC.jpg **
[ERROR] vfs_read:523: ext4load mmc fail
[ERROR] DecodeFile:757: Fail: Load_Photo2Dram return size is 0 !!
mmc change mount : tvcustomer
Size of file "/PAL.jpg" from mmc device 0 partition tvcustomer: -1 bytes
Loading file "/PAL.jpg" at offset 0x0 from mmc device 0 partition tvcustomer
** File not found /PAL.jpg **
[ERROR] vfs_read:523: ext4load mmc fail
[ERROR] DecodeFile:757: Fail: Load_Photo2Dram return size is 0 !!
In HAL_AUDIO_SetDspBaseAddr, line(4350), u8Index(0x0), u32Bin_Base_Address(0x0), u32Mad_Base_Buffer_Adr(0x39280000)
In HAL_AUDIO_SetDspBaseAddr, line(4350), u8Index(0x1), u32Bin_Base_Address(0x0), u32Mad_Base_Buffer_Adr(0x39000000)
In HAL_AUDIO_SetDspBaseAddr, line(4350), u8Index(0x2), u32Bin_Base_Address(0x0), u32Mad_Base_Buffer_Adr(0x38800000)
[AT][MB][audio_preinit][1301]shed!v_AUDIO_DecoderLoadCode()
boot is not valid
[ztebsp]boot system norm failed, try boot safe!
3 blocks written: OK
ready for input- please chooze: upgrade_d boot / upgrade_all
<< MStar >>#

月光※傾城 · 發表于 2022-11-18 12:21

刷機方法:
1.接好TTL線，上電時不斷按Ctrl+Z鍵進入Mboot。顯示 << MStar >>#

2.Mboot下輸入mmcinfo，回車，查看返回信息，如果是3.多Gib就是4G的閃存，如果7.多Gib就是8G的閃存。

3.U盤格式化為單分區FAT32，然后根據閃存大小把對應的MstarUpgrade.bin放入U(xiǎn)盤根目錄，插到盒子上。

4.Mboot下輸入usb_bin_check，回車。等待刷機完成自動重啟。

電視機頂盒分享 · 發表于 2022-11-18 10:22

提示: 作者被禁止或刪除內容自動屏蔽

hnxxkj · 發表于 2022-11-18 15:43

那已經可以刷機了，有固件就可刷！

Agasnzo · 發表于 2024-11-16 22:12

ready for input- please chooze: upgrade_d boot / upgrade_all
<< MStar >>#

到這里怎么弄呢？下一步不知道該輸入什么，upgrade_d boot或者upgrade_all輸入都提示Unknown command 'upgrade_all' - try 'help'

Agasnzo · 發表于 2024-11-16 22:21

Agasnzo 發表于 2024-11-16 22:12
ready for input- please chooze: upgrade_d boot / upgrade_all
>#

多次嘗試，輸入mmcinfo后立即輸入usb_bin_check就開始刷了，但出現了紅字error，唉，問題好多

電視機頂盒分享頭像被屏蔽	沙發 發表于 2022-11-18 10:22 \| 只看該作者 \| 來自遼寧提示: 作者被禁止或刪除內容自動屏蔽
電視機頂盒分享頭像被屏蔽
	回復 支持反對 使用道具舉報

› 運營商IPTV / 有線電視 / 廣電機頂盒 › 中興機頂盒

中興ZXV10B860AV1.1 ms09280碼跑到時這里就不跑 ...

中興ZXV10B860AV1.1 ms09280碼跑到時這里就不跑

相關帖子