N1盒子怎么連接外網？

gatusokaka · 發表于 2019-12-15 19:11

經過配置文件的修改，N1有線和無線都可以通過win10電腦ping到，想在N1
上裝個samba，一直失敗，后來發現是無法訪問軟件源地址（試了清華的和中科大的）又在N1上ping 百度，無法ping通，dns設了114.114.114.114 和8.8.8.8，現在不知道是什么原因，求大神幫助！

gatusokaka · 發表于 2019-12-15 19:14

補充一下，刷的armbian 5.77

皇子無腦蓋 · 發表于 2019-12-15 19:43

幫頂幫頂

gatusokaka · 發表于 2019-12-15 21:08

大神快來呀

gatusokaka · 發表于 2019-12-16 12:33

貼一個etc/network/interfaces

# Wired adapter #1
allow-hotplug eth0
no-auto-down eth0
iface eth0 inet static
address 10.102.11.101
netmask 255.255.255.0
gateway 10.102.11.1
dns-nameservers 192.168.0.1 114.114.114.114 8.8.8.8
# hwaddress ether # if you want to set MAC manually
# pre-up /sbin/ifconfig eth0 mtu 3838 # setting MTU for DHCP, static just: mtu 3838

# Wireless adapter #1
# Armbian ships with network-manager installed by default. To save you time
# and hassles consider using 'sudo nmtui' instead of configuring Wi-Fi settings
# manually. The below lines are only meant as an example how configuration could
# be done in an anachronistic way:
#
auto wlan0
#allow-hotplug wlan0
#iface wlan0 inet static
#address 192.168.0.116
#netmask 255.255.255.0
#gateway 192.168.0.1
#ns-nameservers 192.168.0.1 114.114.114.114 8.8.8.8
# wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
# Disable power saving on compatible chipsets (prevents SSH/connection dropouts over WiFi)
#wireless-mode Managed
#wireless-power off

# Local loopback
auto lo
iface lo inet loopback

› 智能電視盒 / 安卓TV機頂盒區 › 斐訊盒子