首頁 收藏 QQ群
 網站導航

ZNDS智能電視網 推薦當貝市場

TV應用下載 / 資源分享區

軟件下載 | 游戲 | 討論 | 電視計算器

綜合交流 / 評測 / 活動區

交流區 | 測硬件 | 網站活動 | Z幣中心

新手入門 / 進階 / 社區互助

新手 | 你問我答 | 免費刷機救磚 | ROM固件

查看: 118047|回復: 15
上一主題 下一主題
[魔百盒]

求教,魔百盒CM201-2如何更改MAC碼,

[復制鏈接]
跳轉到指定樓層
樓主
發表于 2018-4-25 00:34 | 只看該作者 回帖獎勵 |倒序瀏覽 |閱讀模式 | 來自北京
求大神幫助,愿意當小白鼠~Bootrom start
Boot Media: NAND
Decrypt auxiliary code ...OK

lsadc voltage min: 000002FF, max: 00000302, aver: 00000300, index: 00000001

Enter boot auxiliary code

Auxiliary code - v1.00
DDR code - V1.1.2 20160205
Build: Sep  7 2017 - 01:06:39

Reg Version:  v1.5.4\
Reg Time:     2017/12/19 12:00:55
Reg Name:     hi3798mv3dml_hi3798mv300_LPDDR3-1600_1GB_32bitx1_4layers.reg
DDRS
Boot auxiliary code success
Bootrom success


System startup


Relocate Boot

Jump to C code


Fastboot 3.3.0 (songyuzheng@TSD182) (Jan 03 2018 - 16:24:09)

Fastboot:      Version 3.3.0
Build Date:    Jan  3 2018, 16:25:10
CPU:           Hi3798Mv300
Boot Media:    NAND
DDR Size:      1GB

Found flash memory controller hifmc100.
Nand ID: 0x2C 0x64 0x44 0x4B 0xA9 0x00 0x00 0x00

Nand: Micron MT29F256G08CMCBB Read-Retry ONFI DDR 2.3
Nand(HW-Auto): Block:2MB Page:8KB OOB:744B ECC:40bit/1k Chip:8GB*1

MMC/SD controller initialization.
No MMC device found !

*** Warning - bad CRC or NAND, using default environment

Net:   upWarning: failed to set MAC address
, gmac0Warning: failed to set MAC address


Boot Env on NAND
    Env Offset:          0x00100000
    Env Size:            0x00010000
    Env Range:           0x00010000
*** Warning - Env offset is NOT aligned to NAND Flash block size, environment value is read only.

Get ID_WORD lock flag : 0


SDK Version: spc012cp0001_v2017120708

nand<2>
[sw_ptable_init,114] begin
partition addr : [0x0]
partition addr : [0x200000, 0x400000]
[swflash_partition_read,217]part_addr:0x200000, part_size:0x400000, offset:0x0, bytes:0xb10
[sw_ptable_check,292]cksum [0x3691], ptable->checksum[0x3691]
[sw_ptable_init,140] data at 0x0 is ok
[swflash_partition_read,217]part_addr:0x200000, part_size:0x400000, offset:0x0, bytes:0xb10
[sw_ptable_check,292]cksum [0x3691], ptable->checksum[0x3691]
0          fastboot    0x000000000     0x000200000
0         partition    0x000200000     0x000800000
0          recovery    0x000A00000     0x002800000
0         recovery2    0x003200000     0x002800000
0              misc    0x005A00000     0x000800000
0         mlcverify    0x006200000     0x001000000
0         swdevinfo    0x007200000     0x001000000
0         baseparam    0x008200000     0x000800000
0        baseparam2    0x008A00000     0x000800000
0           pqparam    0x009200000     0x000800000
0              logo    0x009A00000     0x000800000
0             logo2    0x00A200000     0x000800000
0          fastplay    0x00AA00000     0x003C00000
0         fastplay2    0x00E600000     0x003C00000
0              boot    0x012200000     0x002800000
0             boot2    0x014A00000     0x002800000
0       trustedcore    0x017200000     0x002800000
0       securestore    0x019A00000     0x000800000
0              swdb    0x01A200000     0x015E00000
0             cache    0x030000000     0x032000000
0            system    0x062000000     0x040000000
0          userdata    0x0A2000000     0x000000000
nand flash partition no fs_flags

ptable info:2M(fastboot),8M(partition),40M(recovery),40M(recovery2),8M(misc),16M(mlcverify),16M(swdevinfo),8M(baseparam),8M(baseparam2),8M(pqparam),8M(logo),8M(logo2),60M(fastplay),60M(fastplay2),40M(boot),40M(boot2),40M(trustedcore),8M(securestore),350M(swdb),800M(cache),1024M(system),-(userdata) ubi.mtd=swdb ubi.mtd=cache ubi.mtd=system ubi.mtd=userdata ubi.mtd=swdb ubi.mtd=cache ubi.mtd=system ubi.mtd=userdata

[sw_ptable_dump->252] tmp_bootargs_env=mtdparts=hinand:2M(fastboot),8M(partition),40M(recovery),40M(recovery2),8M(misc),16M(mlcverify),16M(swdevinfo),8M(baseparam),8M(baseparam2),8M(pqparam),8M(logo),8M(logo2),60M(fastplay),60M(fastplay2),40M(boot),40M(boot2),40M(trustedcore),8M(securestore),350M(swdb),800M(cache),1024M(system),-(userdata) ubi.mtd=swdb ubi.mtd=cache ubi.mtd=system ubi.mtd=userdata ubi.mtd=swdb ubi.mtd=cache ubi.mtd=system ubi.mtd=userdata
[sw_ptable_init,183] partition : ok
sw_devinfo_init begin [sw_devinfo_init,823]
[swflash_partition_read,217]part_addr:0x7200000, part_size:0x1000000, offset:0x0, bytes:0x8461c
[swflash_partition_read,217]part_addr:0x7a00000, part_size:0x1000000, offset:0x0, bytes:0x8461c
version : [0]
[devinfo_check,169] ok! msg->checksum:0x8c88, crc16:0x8c88
devinfo_init begin [sw_devinfo_init,946]
[devinfo_ext_check,258] ok! msg->checksum:0x0, crc16:0x0
sw_devinfo_init OK
[swflash_partition_read,217]part_addr:0x12200000, part_size:0x2800000, offset:0x0, bytes:0x2000
use boot cmdline,enable serial, cmdline:[mem=1G  mmz=ddr,0,0,48M vmalloc=500M flashcache=10 quiet console=ttyAMA0,115200 blkdevparts=mmcblk0:]

[sw_boot_set_bootargs->175]use nand m_cmdline: mem=1G  mmz=ddr,0,0,48M vmalloc=500M flashcache=10 quiet console=ttyAMA0,115200 nanddbgfs=+ecc_notice,+read_retry_notice,+read_retry,+dump,+ecc_count,+read_count,+erase_count lpj=974848 mtdparts=hinand:2M(fastboot),8M(partition),40M(recovery),40M(recovery2),8M(misc),16M(mlcverify),16M(swdevinfo),8M(baseparam),8M(baseparam2),8M(pqparam),8M(logo),8M(logo2),60M(fastplay),60M(fastplay2),40M(boot),40M(boot2),40M(trustedcore),8M(securestore),350M(swdb),800M(cache),1024M(system),-(userdata) ubi.mtd=swdb ubi.mtd=cache ubi.mtd=system ubi.mtd=userdata ubi.mtd=swdb ubi.mtd=cache ubi.mtd=system ubi.mtd=userdata
sw_ir_detect begin 500 count
sw_ir_detect ok  

[sw_boot_set_bootargs->242]bootargs:[mem=1G  mmz=ddr,0,0,48M vmalloc=500M flashcache=10 quiet console=ttyAMA0,115200 nanddbgfs=+ecc_notice,+read_retry_notice,+read_retry,+dump,+ecc_count,+read_count,+erase_count lpj=974848 mtdparts=hinand:2M(fastboot),8M(partition),40M(recovery),40M(recovery2),8M(misc),16M(mlcverify),16M(swdevinfo),8M(baseparam),8M(baseparam2),8M(pqparam),8M(logo),8M(logo2),60M(fastplay),60M(fastplay2),40M(boot),40M(boot2),40M(trustedcore),8M(securestore),350M(swdb),800M(cache),1024M(system),-(userdata) ubi.mtd=swdb ubi.mtd=cache ubi.mtd=system ubi.mtd=userdata ubi.mtd=swdb ubi.mtd=cache ubi.mtd=system ubi.mtd=userdata androidboot.selinux=permissive androidboot.force_open_console=none]

start
mlcverify_offset:0x6200000
mlcverify_info_size:2584
[swflash_partition_read,217]part_addr:0x6200000, part_size:0x800000, offset:0x0, bytes:0xa18
start...
checksum:dbce, pmlcverify_info->checksum:dbce
ok,checksum:0xdbce
data at 0x006200000 is ok
maigic:MLCVERIFY!, count:10, time:1515752848
partition0: recovery(c3a000) verify_value:1add
partition1: recovery2(c3a000) verify_value:1add
partition2: baseparam(16ac) verify_value:1c4e
partition3: baseparam2(16ac) verify_value:1c4e
partition4: logo(30000) verify_value:db3a
partition5: logo2(30000) verify_value:db3a
partition6: fastplay(0) verify_value:0
partition7: fastplay2(0) verify_value:0
partition8: boot(963000) verify_value:d0c5
partition9: boot2(963000) verify_value:d0c5
ok
partname: logo
find logo in mlcverify
[swflash_partition_read,217]part_addr:0x9a00000, part_size:0x800000, offset:0x0, bytes:0x30000
verify logo OK
partname: baseparam
find baseparam in mlcverify
[swflash_partition_read,217]part_addr:0x8200000, part_size:0x800000, offset:0x0, bytes:0x16ac
verify baseparam OK
[Android_Main,39] begin
[sw_set_gpio,128] OK
[swflash_partition_read,217]part_addr:0x5a00000, part_size:0x800000, offset:0x0, bytes:0x10000
boot normal!!!
partname: boot
find boot in mlcverify
[swflash_partition_read,217]part_addr:0x12200000, part_size:0x2800000, offset:0x0, bytes:0x963000
verify boot OK
[sw_boot_set_bootcmd->365]bootm now: bootm 0x1FFFFC0
[Android_Main,86] ok
Reserve Memory
    Start Addr:          0xFFFE000
    Bound Addr:          0x8D99000
    Free  Addr:          0xF0A8000
    Alloc Block:  Addr         Size
                  0xFBFD000   0x400000
                  0xF8FC000   0x300000
                  0xF8F9000   0x2000
                  0xF878000   0x80000
                  0xF5D4000   0x2A3000
                  0xF24F000   0x384000
                  0xF24B000   0x3000
                  0xF0**00   0x195000
                  0xF0AB000   0x9000
                  0xF0A8000   0x2000

[abortboot,110] begin
[abortboot,113] close loader keyed
Check Hisilicon_ADVCA ...
Not hisilicon ADVCA image ...

Found Initrd at 0x04E00000 (Size 747485 Bytes), align at 2048 Bytes

## Booting kernel from Legacy Image at 020007c0 ...
   Image Name:   Linux-3.18.24_hi3798mv2x
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    9092184 Bytes = 8.7 MiB
   Load Address: 02000000
   Entry Point:  02000000
   Loading Kernel Image from 0x33556480 to 0x33554432 ... OK
OK
There are some conflict between "booargs" and "bootargs_1G".
The param "mmz " in "bootargs_1G" will be ignored.

ATAGS [0x00000100 - 0x000005FC], 1276Bytes

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
>>>  init /disk2/zhangchaoyang/SDK/Hisi3798MV300_mlc/device/hisilicon/bigfish/sdk/source/kernel/linux-3.18.y/drivers/usb/usbir/usb-ir.c  usb_usbir_init
UBI error: ubi_attach_mtd_dev: mtd18 is already attached to ubi0
UBI error: ubi_init: cannot attach mtd18
UBI error: ubi_attach_mtd_dev: mtd19 is already attached to ubi1
UBI error: ubi_init: cannot attach mtd19
UBI error: ubi_attach_mtd_dev: mtd20 is already attached to ubi2
UBI error: ubi_init: cannot attach mtd20
UBI error: ubi_attach_mtd_dev: mtd21 is already attached to ubi3
UBI error: ubi_init: cannot attach mtd21
init: /init.bigfish.rc: 55: invalid command 'getprop'
init: /init.bigfish.rc: 114: invalid option 'sdcard_r'
init: could not import file '/init.sunniwell.rc' from '/init.rc'
init: /dev/hw_random not found
init: cannot open '/initlogo.rle'
init: /dev/hw_random not found
init: call cmd SYS_GET_CHIPPACKAGETYPE failed :Invalid argument
init: reg_value = 0xffffffff
init: read reg value failed
init: [devinfo] name:mac,value:54:C5:7A:42:73:28
init: [devinfo] name:serialno,value:003201FF0001061001B154C57A427328
init: [devinfo] name:secureline,value:100
init: [devinfo] name:deviceid,value:111001610505162
init: sw_properties_init end..
healthd: wakealarm_init: timerfd_create failed
init: cannot find '/system/bin/rild', disabling 'ril-daemon'
healthd: No charger supplies found
init: cannot find '/system/bin/dbus-daemon', disabling 'dbus'
init: cannot find '/system/bin/teecd', disabling 'teecd'
init: cannot find '/system/bin/frontPanel', disabling 'frontPanel'
init: cannot find '/system/bin/dtvserver', disabling 'dtvserver'
init: cannot find '/system/bin/gpio-led', disabling 'gpio-led'
init: cannot find '/system/bin/usb-driver', disabling 'usb-driver'
init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
init: powerctl: cannot expand '${sys.powerctl}'
init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'
root@Hi3798MV300:/ # init: sys_prop: permission denied uid:1002  name:persist.bt.fwdump
init: untracked pid 1993 exited
init: sys_prop: permission denied uid:1000  name:ro.config.gfx2d_compose
sd 0:0:0:0: [sda] No Caching mode page found
sd 0:0:0:0: [sda] Assuming drive cache: write through
init: untracked pid 1996 exited
init: sys_prop: permission denied uid:1000  name:persist.ethernet.on


上一篇:各位大神,cm101s-2有復位鍵嗎??
下一篇:廣東移動魔百和MG101-UA5_GD免ttl安裝第三方應用
推薦
發表于 2018-4-25 10:00 | 只看該作者 | 來自重慶
先把機器刷成磚,再把磚頭刷成機器,我都佩服自己在ZNDS學到的刷機技術!
回復 支持 0 反對 1

使用道具 舉報

頭像被屏蔽
板凳
發表于 2018-4-25 09:52 | 只看該作者 | 來自山東
提示: 作者被禁止或刪除 內容自動屏蔽
回復 支持 反對

使用道具 舉報

地板
發表于 2018-4-25 10:15 | 只看該作者 | 來自浙江
只能幫頂了
回復 支持 反對

使用道具 舉報

5#
發表于 2018-4-25 16:17 來自ZNDS手機版 | 只看該作者 | 來自廣東
Addghvhjjggjj
回復 支持 反對

使用道具 舉報

6#
發表于 2018-4-26 00:58 來自ZNDS手機版 | 只看該作者 | 來自湖南
看起來不錯噢!感謝分享!!
回復 支持 反對

使用道具 舉報

7#
發表于 2018-4-26 05:47 | 只看該作者 | 來自廣東
老鐵666!必須支持一波!
回復 支持 反對

使用道具 舉報

8#
發表于 2018-4-26 19:36 | 只看該作者 | 來自山西

看起來不錯噢!感謝分享??!
回復 支持 反對

使用道具 舉報

9#
發表于 2018-4-28 06:43 來自ZNDS手機版 | 只看該作者 | 來自黑龍江
支持樓主
回復 支持 反對

使用道具 舉報

10#
發表于 2018-10-13 19:06 | 只看該作者 | 來自湖北
要改這種MAC的可以和我聯系,用戶我就是微信號
回復 支持 反對

使用道具 舉報

11#
發表于 2018-11-21 10:52 | 只看該作者 | 來自云南
ttl
swdevinfo命令
回復 支持 反對

使用道具 舉報

12#
發表于 2019-1-20 17:51 | 只看該作者 | 來自河南
dd if=/mnt/sda/sda4/deviceinfo.img of=/dev/block/mmcblk0p4
回復 支持 反對

使用道具 舉報

13#
發表于 2019-7-16 13:25 來自ZNDS手機版 | 只看該作者 | 來自河南
4105211987li 發表于 2019-1-20 17:51
dd if=/mnt/sda/sda4/deviceinfo.img of=/dev/block/mmcblk0p4

能刷嗎?
回復 支持 反對

使用道具 舉報

14#
發表于 2020-3-12 23:05 | 只看該作者 | 來自江蘇
這里跑碼結束沒法輸入怎么回事?
回復 支持 反對

使用道具 舉報

15#
發表于 2021-1-11 17:01 | 只看該作者 | 來自湖南
可以聯系我,遠程改。
回復 支持 反對

使用道具 舉報

您需要登錄后才可以回帖 登錄 | 立即注冊

本版積分規則

Archiver|新帖|標簽|軟件|Sitemap|ZNDS智能電視網 ( 蘇ICP備2023012627號 )

網絡信息服務信用承諾書 | 增值電信業務經營許可證:蘇B2-20221768 丨 蘇公網安備 32011402011373號

GMT+8, 2024-12-22 18:39 , Processed in 0.100383 second(s), 15 queries , Redis On.

Powered by Discuz!

監督舉報:report#znds.com (請將#替換為@)

© 2007-2024 ZNDS.Com

快速回復 返回頂部 返回列表