我的出現這樣的bug應該怎么辦
接下來都是亂碼
AC_ON
MIU0_DQS-OK
BIST0-覽
MIU0-1024_U
Start uboot
Relocation Offset is: 011d7000
[AT][MB][start ub][519]
U-Boot 2011.06-00083-g94d627c-dirty (Feb 27 2017 - 11:12:10)
[MIU INFO] miu opencreate instance at 559e9418 with private size 80 bytes at 559e9460
create instance at 559e94b8 with private size 52 bytes at 559e9500
uboot held at [557ddf60~56b00000],size=013220a0
CPU : Clippers
Board: BD_MST207C_D01A_S_CLIPPERS
DRAM: 875 MiB
Now running in RAM - U-Boot at: 55c00000
eMMC: HS200 200MHz
eMMC 7.28 GB [E8FFF8h]
In: serial
Out: serial
Err: serial
Net: zte_shutdow =false
No ethernet found.
Set MAC default
MAC: 0x0: 0x30: 0x1b: 0xba:0x2: 0xdb
msIR_Initialize
[CPU INFO] cpu opencreate instance at 559f99c0 with private size 44 bytes at 559f9a08
CPUIoctl - MDrv_CMD_CPU_QueryClock
[UTOPIA INFO] close moduleNames[38]: MODULE_CPU
[AT][MBoot][Driver Init][744]
Starting logo
============= set bootargs ===============
Hit any key to stop autoboot: 0
do_bootcheck called
MMC_CAPACITY_512 =15269880
current emmc size is =0xe8fff8 (should by 512)
MMCusrdata_size =11773944
current userdata size =0xb3a7f8 (should by 512)
this is 8G emmc
get_boot1_ver cmd_boot1=mmc read.boot 1 0x25000000 0x0 0x200000
set hdmi hdcp mode 0!
Saving Environment to MMC...
Writing to MMC(0)... 128 blocks written: OK
128 blocks written: OK
done
iTVStandard2Resolution = 5
value[29] = BD1004990070344000000495735AA0AC
[ztebsp] BootMode=0
[do_bootcheck,1152][ZTEWatchdog]PATCH FOR zte BEGIN
[do_bootcheck,1156][ZTEWatchdog] Watchdog_enable TRUE
[do_bootcheck,1162][ZTEWatchdog] Watchdog start, MAXTIME 120
create instance at 559f9be0 with private size 256 bytes at 559f9c28
MDrv_PNL_Init u32PnlRiuBaseAddr = 1f200000
MDrv_PNL_Init u32PMRiuBaseAddr = 1f000000
PNL:[MDrv_PNL_SetPanelType][613]
[_MDrv_PNL_Init_LPLL][323]pstPanelInitData->u16Width=1920, pstPanelInitData->u16Height=1080
[_MDrv_PNL_Init_LPLL][325]u16HTotal=2200,u16VTotal=1125,pstPanelInitData->u16HTotal=2200,pstPanelInitData->u16VTotal=1125, u16DefaultVFreq=600
[_MDrv_PNL_Init_Output_Dclk][369]pstPanelInitData->u16Width=1920, pstPanelInitData->u16Height=1080
[_MDrv_PNL_Init_Output_Dclk][371]u16HTotal=2200,u16VTotal=1125,pstPanelInitData->u16HTotal=2200,pstPanelInitData->u16VTotal=1125, u16DefaultVFreq=600
PNL:CalculateLPLLSETbyDClk u32KHz = 1485000000, u64DefaultLdHz = 1485000000
PNL:CalculateLPLLSETbyDClk u32LpllSet = 3531df
[MApi_XC_MLG_GetStatus, 1603]No instance existed, please get an instance by calling MApi_XC_Init() first
msHdmitx_Disp_Init
create instance at 559f9d30 with private size 1720 bytes at 559f9d78
[XC,Version]
no need to patchcreate instance at 559fa978 with private size 80 bytes at 559fa9c0
Rx Support HDMI mode!
setHDMITxAnalogTuning: Error: MApi_HDMITx_GetRxDCInfoFromEDID EDID is not ready, at 262
shift 0 pixels in NTSC mode
Create Dolby single part name task failed!![Hal_VE_Set_PreHSD][1826] ERROR!!! HVSD H input = 0, HVSD H output = 720
[Hal_VE_Set_PreVSD][2002] ERROR!!! HVSD V input = 0, HVSD V output = 480
[Hal_VE_EnableDI][2110] bEnable = 0, bIsDNR2VE = 0
lyndon Hal_VE_Set_PreVSD 1mmc change mount : tvcustomer
Size of file "/1080.jpg" from mmc device 0 partition tvcustomer: 103276 bytes
Loading file "/1080.jpg" at offset 0x0 from mmc device 0 partition tvcustomer
103276 bytes read
create instance at 559faa18 with private size 304 bytes at 559faa60
[AT][MB][JPD Decode][1250]
[UTOPIA INFO] close moduleNames[35]: MODULE_NJPEG_EX
create instance at 559faa18 with private size 132280 bytes at 559faa60
[GOP INFO] gop opencreate instance at 55a1af20 with private size 6908 bytes at 55a1af68
[AT][MB][Show Logo][1298]
In HAL_AUDIO_SetDspBaseAddr, line(4350), u8Index(0x0), u32Bin_Base_Address(0x0), u32Mad_Base_Buffer_Adr(0x37bb0000)
In HAL_AUDIO_SetDspBaseAddr, line(4350), u8Index(0x1), u32Bin_Base_Address(0x0), u32Mad_Base_Buffer_Adr(0x37930000)
In HAL_AUDIO_SetDspBaseAddr, line(4350), u8Index(0x2), u32Bin_Base_Address(0x0), u32Mad_Base_Buffer_Adr(0x37130000)
[======= initialize DEC-R2[0] SHM =======]
[======= initialize DEC-R2[1] SHM =======]
[AT][MB][audio_preinit][1370]shed!v_AUDIO_DecoderLoadCode()
[ERROR] _RawData_Authentication:1503: ###1
[ERROR] _RawData_Authentication:1505: ###2
## Booting kernel from Legacy Image at 25000800 ...
Image Name: MStar-linux
Image Type: ARM Linux Multi-File Image (uncompressed)
Data Size: 5313197 Bytes = 5.1 MiB
Load Address: 20208000
Entry Point: 20208000
Contents:
Image 0: 4623992 Bytes = 4.4 MiB
Image 1: 689193 Bytes = 673 KiB
## Loading init Ramdisk from multi component Legacy Image at 25000800 ...
-usb_stop(USB_PORT0)
-usb_stop(USB_PORT1)
-usb_stop(USB_PORT2)
Loading Multi-File Image ... OK
[AT][MB][start kr][1628]
Starting kernel ...
[PROTECT ERROR], not expected dram size: 0x0
#######################################################################
# [PROTECT WARNING], miu kernel protect is not enabled on second dram #
#######################################################################
Uncompressing Linux... done, booting the kernel.
KERN-3.10.23.001049551
Ctommy: thread_info_cache_init
mtdoops: mtd device (mtddev=name/number) must be supplied
[drivers/mstar2/drv/emac/mdrv_emac.c MDev_EMAC_HW_init 2196] ready init mutex
[drivers/mstar2/drv/emac/mdrv_emac.c MDev_EMAC_HW_init 2197] after init mutex
RBQP_BASE = 51604000
init: /init.clippers.rc: 412: ignored duplicate definition of service 'mdnsd'
init: /zte_init.rc: 38: ignored duplicate definition of service 'xiriservice'
A N D R O I D
init: ## ProductID: strlen (32)!
healthd: No charger supplies found
nu}nvnv:縊o緎n}znu}nvnv:縊o緎n}znu}nvnv:縊o緎n}znu}nvnv:縊o緎n}znu}nvnv:縊o緎n}znu}nvnv:縊o緎n}znu}nvnv:縊o緎n}znu}nvnv:縊o緎n}znu}nvnv:縊o緎n}znu}nvnv:縊o緎n}znu}nvnv:縊o緎n}znu}nvnv:縊o緎n}znu}nvnv:縊o緎n}znu}nvnv:縊o緎n}znu}nvnv:縊o緎n}znu}nvnv:縊o緎n}znu}nvnv:縊o緎n}znu}nvnv:縊o緎n}znu}nvnv:縊o緎n}znu}nvnv:縊o緎n}znu}nvnv:縊o緎n}znu}nvnv:縊o緎n}znu}nvnv:縊o緎n}znu}nvnv:縊o緎n}znu}nvnv:縊o緎n}znu}nvnv:縊o緎n}znu}nvnv:縊o緎n}znu}nvnv:縊o緎n}znu}nvnv:縊o緎n}znu}nvnv:縊o緎n}znu}nvnv:縊o緎n}znu}nvnv:縊o緎n}znu}nvnv:縊o緎n}znu}nvnv:縊o緎n}znu}nvnv:縊o緎n}znu}nvnv:縊o緎n}znu}nvnv:縊o緎n}znu}nvnv:縊o緎n}znu}nvnv:縊o緎n}znu}nvnv:縊o緎n}znu}nvnv:縊o緎n}znu}nvnv:縊o緎n}znu}nvnv:縊o緎n}znu}nvnv:縊o緎n}znu}nvnv:縊o緎n}znu}nvnv:縊o緎n}znu}nvnv:縊o緎n}znu}nvnv:縊o緎n}znu}nvnv:縊o緎n}znu}nvnv:縊o緎n}zu}nvnv:O}znu}nvnv:O?osn}znu}nvnv:Oosn}znu}nvnv: < |
網站導航
樓主: s2fm2
[復制鏈接]
發表于 2017-9-26 16:59
znds.com 