E900-S TTL讀取的數據，但是無法輸入，請大神幫忙看下代碼

pplps · 發表于 2017-2-4 16:14

這是通過ttl讀取出的e900-s的代碼，看不懂，也無法輸入，還請哪位大俠幫忙看下，什么問題，萬分感謝！
init: sys_prop: permission denied uid:1003  name:service.bootanim.exit
usb_storage: exports duplicate symbol fill_inquiry_response (owned by kernel)
ehci_hcd: exports duplicate symbol ehci_init_driver (owned by kernel)

AC_ON
MIU0_DQS-OK
BIST0-
MIU0-1024_U
Relocation Offset is: 011d7000
[AT][MB][start ub][348]

U-Boot 2011.06 (Sep 22 2016 - 14:17:25)

[MIU INFO] miu opencreate instance at 559e9418 with private size 80 bytes at 559e9460
create instance at 559e94b8 with private size 52 bytes at 559e9500

uboot held at [557ddf60~56b00000],size=013220a0
CPU  : Clippers
Board: BD_MST207C_D01A_S_CLIPPERS
DRAM:  875 MiB
Now running in RAM - U-Boot at: 55c00000

eMMC: HS200 200MHz
eMMC 7.28 GB [E8FFF8h]
In: serial
Out: serial
Err: serial
Net: No ethernet found.
Set MAC default
MAC:  0x0: 0x30: 0x1b: 0xba:0x2: 0xdb
msIR_Initialize
In HAL_AUDIO_SetDspBaseAddr, line(4350), u8Index(0x0), u32Bin_Base_Address(0x0), u32Mad_Base_Buffer_Adr(0x37bb0000)
In HAL_AUDIO_SetDspBaseAddr, line(4350), u8Index(0x1), u32Bin_Base_Address(0x0), u32Mad_Base_Buffer_Adr(0x37930000)
In HAL_AUDIO_SetDspBaseAddr, line(4350), u8Index(0x2), u32Bin_Base_Address(0x0), u32Mad_Base_Buffer_Adr(0x37130000)
[======= initialize DEC-R2[0] SHM =======]
[======= initialize DEC-R2[1] SHM =======]
DEC System code download finished!v_AUDIO_DecoderLoadCode()
[CPU INFO] cpu opencreate instance at 559f99c0 with private size 44 bytes at 559f9a08
CPUIoctl - MDrv_CMD_CPU_QueryClock
[UTOPIA INFO] close moduleNames[38]: MODULE_CPU

[AT][MBoot][Driver Init][561]
lwx_debug:boot_protect 0

Changelist:    24543697
============= set bootargs ===============
Hit any key to stop autoboot:  0
AC on
get ir boot mode, count is 1
fore uup IRKey [0xff]
get ir boot mode, count is 2
fore uup IRKey [0xff]
get ir boot mode, count is 3
fore uup IRKey [0xff]
get ir boot mode, count is 4
fore uup IRKey [0xff]
get ir boot mode, count is 5
fore uup IRKey [0xff]
get ir boot mode, count is 6
fore uup IRKey [0xff]
get ir boot mode, count is 7
fore uup IRKey [0xff]
get ir boot mode, count is 8
fore uup IRKey [0xff]
get ir boot mode, count is 9
fore uup IRKey [0xff]
get ir boot mode, count is 10
fore uup IRKey [0xff]
get ir boot mode, count is 11
fore uup IRKey [0xff]
get ir boot mode, count is 12
fore uup IRKey [0xff]
[do_bootcheck,992][ZTEWatchdog]PATCH FOR zte BEGIN
[do_bootcheck,996][ZTEWatchdog] Watchdog_enable TRUE
[do_bootcheck,1002][ZTEWatchdog] Watchdog start, MAXTIME 120
Writing to MMC(0)... 128 blocks written: OK
128 blocks written: OK
done
create instance at 559f9c70 with private size 256 bytes at 559f9cb8
MDrv_PNL_Init u32PnlRiuBaseAddr = 1f200000
MDrv_PNL_Init u32PMRiuBaseAddr = 1f000000
PNL:[MDrv_PNL_SetPanelType][613]
[_MDrv_PNL_Init_LPLL][323]pstPanelInitData->u16Width=1280, pstPanelInitData->u16Height=720
[_MDrv_PNL_Init_LPLL][325]u16HTotal=1980,u16VTotal=750,pstPanelInitData->u16HTotal=1980,pstPanelInitData->u16VTotal=750, u16DefaultVFreq=500
[_MDrv_PNL_Init_Output_Dclk][369]pstPanelInitData->u16Width=1280, pstPanelInitData->u16Height=720
[_MDrv_PNL_Init_Output_Dclk][371]u16HTotal=1980,u16VTotal=750,pstPanelInitData->u16HTotal=1980,pstPanelInitData->u16VTotal=750, u16DefaultVFreq=500
PNL:CalculateLPLLSETbyDClk u32KHz = 742500000, u64DefaultLdHz = 742500000
PNL:CalculateLPLLSETbyDClk u32LpllSet = 3531df
[MApi_XC_MLG_GetStatus, 1603]No instance existed, please get an instance by calling MApi_XC_Init() first
msHdmitx_Disp_Init
create instance at 559f9dc0 with private size 1720 bytes at 559f9e08
[XC,Version]
no need to patchcreate instance at 559faa08 with private size 80 bytes at 559faa50
Rx Support HDMI mode!
3-1 ssc_span_val=1887436800, ssc_step_val=0, reg_32value=2440322
3-2 ssc_span_val=773, ssc_step_val=0, reg_32value=2440322
3-3 ssc_span_val=773, ssc_step_val=3, reg_32value=2440322
msdbg REG_PKT_AVI_1_09=5850, 0x2008=2, bIs420=0
msdbg bIsMSO9280NC = 0, bIsHDMI20=0, b222MHz=0, idx=5, cd_val=0
setHDMITxAnalogTuning: Error: MApi_HDMITx_GetRxDCInfoFromEDID EDID is not ready, at 260
shift -8 pixels in PAL mode
Create Dolby single part name task failed!![Hal_VE_Set_PreHSD][1817] ERROR!!! HVSD H input = 0, HVSD H output = 720
[Hal_VE_Set_PreVSD][1991] ERROR!!! HVSD V input = 0, HVSD V output = 576
[Hal_VE_EnableDI][2099] bEnable = 0, bIsDNR2VE = 0
mmc change mount : userdata
Size of file "local/boot0.jpg" from mmc device 0 partition userdata: -1 bytes
mmc change mount : tvconfig
Size of file "/boot0.jpg" from mmc device 0 partition tvconfig: 180228 bytes
Loading file "/boot0.jpg" at offset 0x0 from mmc device 0 partition tvconfig
180228 bytes read
create instance at 559faaa8 with private size 304 bytes at 559faaf0
[AT][MB][JPD Decode][1803]

[UTOPIA INFO] close moduleNames[35]: MODULE_NJPEG_EX

create instance at 559faaa8 with private size 132280 bytes at 559faaf0

[GOP INFO] gop opencreate instance at 55a1afb0 with private size 6912 bytes at 55a1aff8
create instance at 55a1cb00 with private size 1720 bytes at 55a1cb48
GOPLog  gop=3 alphainverse = 1 Ioctl_GOP_Init(6360)
GOPLog gopdst=0x0 gop=3 enable=1 MDrv_GOP_GWIN_SetAlphaInverse(3044)
GOPLog GopDst=0x2 gop=3  MApi_GOP_GWIN_SetGOPDst(2956)
GOPLog GopDst=0x3 gop=3  Ioctl_GOP_SetDst(7576)
GOPLog gopdst=0x3 gop=3 alphainverse = 1 _GOP_SetOCCapability(2781)
GOPLog gopdst=0x3 gop=3 enable=1 MDrv_GOP_GWIN_SetAlphaInverse(3044)
[AT][MB][Show Logo][1883]
Unknown command 'uart_rx' - try 'help'
## Booting kernel from Legacy Image at 25000000 ...
Image Name: MStar-linux
Image Type: ARM Linux Multi-File Image (uncompressed)
Data Size: 4798502 Bytes = 4.6 MiB
Load Address: 20208000
Entry Point:  20208000
Contents:
   Image 0: 4468848 Bytes = 4.3 MiB
   Image 1: 329642 Bytes = 321.9 KiB
## Loading init Ramdisk from multi component Legacy Image at 25000000 ...
-usb_stop(USB_PORT0)
-usb_stop(USB_PORT1)
-usb_stop(USB_PORT2)
Loading Multi-File Image ... OK
[AT][MB][start kr][1981]

Starting kernel ...

[PROTECT ERROR], not expected dram size: 0x0
#######################################################################
# [PROTECT WARNING], miu kernel protect is not enabled on second dram #
#######################################################################
Uncompressing Linux... done, booting the kernel.
KERN-3.10.23.001049551
tommy: thread_info_cache_init
mtdoops: mtd device (mtddev=name/number) must be supplied
[drivers/mstar2/drv/emac/mdrv_emac.c MDev_EMAC_HW_init 2091] ready init mutex

[drivers/mstar2/drv/emac/mdrv_emac.c MDev_EMAC_HW_init 2092] after init mutex
RBQP_BASE = 53d04000
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
init: /init.clippers.rc: 351: ignored duplicate definition of service 'mdnsd'
init: /dev/hw_random not found

         A N D R O I D

fs_mgr: Warning: unknown flag block_validity
fs_mgr: Warning: unknown flag nodiscard
fs_mgr: Warning: unknown flag data=ordered
fs_mgr: Warning: unknown flag journal_checksum
fs_mgr: Warning: unknown flag block_validity
fs_mgr: Warning: unknown flag nodiscard
fs_mgr: Warning: unknown flag data=ordered
fs_mgr: Warning: unknown flag journal_checksum
fs_mgr: Warning: unknown flag block_validity
fs_mgr: Warning: unknown flag nodiscard
fs_mgr: Warning: unknown flag data=ordered
fs_mgr: Warning: unknown flag journal_checksum
fs_mgr: Warning: unknown flag block_validity
fs_mgr: Warning: unknown flag nodiscard
fs_mgr: Warning: unknown flag data=ordered
fs_mgr: Warning: unknown flag journal_checksum
fs_mgr: Warning: unknown flag block_validity
fs_mgr: Warning: unknown flag nodiscard
fs_mgr: Warning: unknown flag data=ordered
fs_mgr: Warning: unknown flag journal_checksum
fs_mgr: Warning: unknown flag block_validity
fs_mgr: Warning: unknown flag nodiscard
fs_mgr: Warning: unknown flag data=ordered
fs_mgr: Warning: unknown flag journal_checksum
fs_mgr: Warning: unknown flag block_validity
fs_mgr: Warning: unknown flag nodiscard
fs_mgr: Warning: unknown flag data=ordered
fs_mgr: Warning: unknown flag journal_checksum
fs_mgr: Warning: unknown flag block_validity
fs_mgr: Warning: unknown flag nodiscard
fs_mgr: Warning: unknown flag data=ordered
fs_mgr: Warning: unknown flag journal_checksum
fs_mgr: Warning: unknown flag block_validity
fs_mgr: Warning: unknown flag nodiscard
fs_mgr: Warning: unknown flag data=ordered
fs_mgr: Warning: unknown flag journal_checksum
fs_mgr: Warning: unknown flag block_validity
fs_mgr: Warning: unknown flag nodiscard
fs_mgr: Warning: unknown flag data=ordered
fs_mgr: Warning: unknown flag journal_checksum
fs_mgr: Warning: unknown flag block_validity
fs_mgr: Warning: unknown flag nodiscard
fs_mgr: Warning: unknown flag data=ordered
fs_mgr: Warning: unknown flag journal_checksum
fs_mgr: Warning: unknown flag block_validity
fs_mgr: Warning: unknown flag nodiscard
fs_mgr: Warning: unknown flag data=ordered
fs_mgr: Warning: unknown flag journal_checksum
mdrv_software_ir: version magic 'SMP mod_unload ARMv7 ' should be '3.10.23 SMP preempt mod_unload ARMv7 '
init: /dev/hw_random not found
healthd: No charger supplies found
init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
init: powerctl: cannot expand '${sys.powerctl}'
init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'
root@orange:/ # fs_mgr: Warning: unknown flag block_validity
fs_mgr: Warning: unknown flag nodiscard
fs_mgr: Warning: unknown flag data=ordered
fs_mgr: Warning: unknown flag journal_checksum
fs_mgr: Warning: unknown flag block_validity
fs_mgr: Warning: unknown flag nodiscard
fs_mgr: Warning: unknown flag data=ordered
fs_mgr: Warning: unknown flag journal_checksum
fs_mgr: Warning: unknown flag block_validity
fs_mgr: Warning: unknown flag nodiscard
fs_mgr: Warning: unknown flag data=ordered
fs_mgr: Warning: unknown flag journal_checksum
fs_mgr: Warning: unknown flag block_validity
fs_mgr: Warning: unknown flag nodiscard
fs_mgr: Warning: unknown flag data=ordered
fs_mgr: Warning: unknown flag journal_checksum
fs_mgr: Warning: unknown flag block_validity
fs_mgr: Warning: unknown flag nodiscard
fs_mgr: Warning: unknown flag data=ordered
fs_mgr: Warning: unknown flag journal_checksum
fs_mgr: Warning: unknown flag block_validity
fs_mgr: Warning: unknown flag nodiscard
fs_mgr: Warning: unknown flag data=ordered
fs_mgr: Warning: unknown flag journal_checksum
init: sys_prop: permission denied uid:1002  name:persist.bt.fwdump
init: sys_prop: permission denied uid:1003  name:service.bootanim.exit
usb_storage: exports duplicate symbol fill_inquiry_response (owned by kernel)
ehci_hcd: exports duplicate symbol ehci_init_driver (owned by kernel)

冥河戰神 · 發表于 2021-10-22 19:54

按一下 ctrl + c 就可以輸入了

ypl6688 · 發表于 2017-5-3 06:00

我的也是這種情況

wan362527 · 發表于 2017-12-10 18:08

中興zxv10 B860AV1.1-T2機頂盒putty跑碼完成不能輸入命令江西版本

intter · 發表于 2018-1-22 22:06

怎么解決。我也是。

唯涂涂不可辜負 · 發表于 2018-1-27 16:07

wan362527 發表于 2017-12-10 18:08
中興zxv10 B860AV1.1-T2機頂盒putty跑碼完成不能輸入命令江西版本

請問大哥解決了沒，我也是這樣，江西的

lyly4422 · 發表于 2018-4-23 09:55

這個是什么情況？系統保護？怎么解決？

Qwer4830 · 發表于 2020-3-5 15:28

這個問題已解決,已經刷了自由安裝APP,掃頭像發你視頻證實興奮的結果

常集閑來 · 發表于 2022-2-11 01:54

冥河戰神發表于 2021-10-22 19:54
按一下 ctrl + c 就可以輸入了

真的是這樣謝謝你了。

› 智能電視盒 / 安卓TV機頂盒區 › 創維盒子論壇