首頁 收藏 QQ群
 網站導航

ZNDS智能電視網 推薦當貝市場

TV應用下載 / 資源分享區

軟件下載 | 游戲 | 討論 | 電視計算器

綜合交流 / 評測 / 活動區

交流區 | 測硬件 | 網站活動 | Z幣中心

新手入門 / 進階 / 社區互助

新手 | 你問我答 | 免費刷機救磚 | ROM固件

查看: 30763|回復: 3
上一主題 下一主題
[求助]

廣東移動送的盒子M301H,線刷再卡刷都可以,但開不了機

[復制鏈接]
跳轉到指定樓層
樓主
發表于 2023-3-21 13:03 | 只看該作者 |只看大圖 回帖獎勵 |倒序?yàn)g覽 |閱讀模式 | 來自廣東
廣東移動送的盒子M301H,線刷再卡刷都可以,但開不了機 廣東移動送的盒子M301H,線刷再卡刷都可以,但開不了機
移動送的盒子M301H,線刷再卡刷都可以,但開不了機,提示這個,大神是什么原因?

Relocate Boot

Jump to C code


Fastboot 3.3.0 (proj-gdY-GDYD__121135@join-r730-00) (Dec 07 2019 - 11:30:56)

Fastboot:      Version 3.3.0
Build Date:    Dec  7 2019, 11:31:38
CPU:           Hi3798Mv310
Boot Media:    eMMC
DDR Size:      1GB

Found flash memory controller hifmc100.
no found nand device.

MMC/SD controller initialization.
scan edges:2 p2f:6 f2p:8
mix set temp-phase 3
scan elemnts: startp:120 endp:113
Tuning SampleClock. mix set phase:[03/07] ele:[11/15]
MMC/SD Card:
    MID:         0x15
    Read Block:  512 Bytes
    Write Block: 512 Bytes
    Chip Size:   7456M Bytes (High Capacity)
    Name:        "8GTF4R"
    Chip Type:   MMC
    Version:     5.1
    Speed:       100000000Hz
    Mode:        HS400
    Voltage:     1.8V
    Bus Width:   8bit
    Boot Addr:   0 Bytes
(Re)start USB...
USB0:   Register 1313 NbrPorts 3
USB EHCI 1.00
scanning bus 0 for devices... 2 USB Device(s) found
       scanning usb for storage devices... 1 Storage Device(s) found
reading bootargs.bin
bootargs.bin on device:usb:0:1 FOUND!
reading bootargs.bin from 0
...Net:   up

Boot Env on eMMC
    Env Offset:          0x00200000
    Env Size:            0x00010000
    Env Range:           0x00010000
start download process.


SDK Version: HiSTBAndroidV600R003C01SPC031_patch5

(Re)start USB...
USB0:   Register 1313 NbrPorts 3
USB EHCI 1.00
scanning bus 0 for devices... 2 USB Device(s) found
       scanning usb for storage devices... 1 Storage Device(s) found
reading recovery.img
recovery.img on device:usb:0:1 FOUND!
reading recovery.img from 0
...............................................................................................................................................................................................................................................## Booting kernel from Legacy Image at 01000000 ...
   Image Name:   Linux-3.18.24_3798mv310
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4913236 Bytes = 4.7 MiB
   Load Address: 02000000
   Entry Point:  02000000
   Loading Kernel Image from 0x16777280 to 0x33554432 ... OK
OK
ATAGS [0x00000100 - 0x00000490], 912Bytes

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
Warning: unable to open an initial console.
init: could not import file '/init.recovery.bigfish.rc' from '/init.rc'
init: /dev/hw_random not found
init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'
init: cannot expand '${ro.serialno}' while writing to '/sys/class/android_usb/android0/iSerial'
init: /dev/hw_random not found
init: Unable to open persistent property directory /data/property errno: 2
init: untracked pid 527 exited
init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
init: powerctl: cannot expand '${sys.powerctl}'
# __bionic_open_tzdata: couldn't find any tzdata when looking for Asia/Shanghai!
__bionic_open_tzdata: couldn't find any tzdata when looking for GMT!
__bionic_open_tzdata: couldn't find any tzdata when looking for posixrules!
Starting recovery on Thu Jan  1 00:00:00 1970
I:Load the recovery.emmc.fstab
Hdmi_event_listen 0x11 hd_fmt:11
unplug :sd fmt 11 set to disp1!
sd 0:0:0:0: [sda] No Caching mode page found
sd 0:0:0:0: [sda] Assuming drive cache: write through

============== /proc/partitions information ==============
major minor  #blocks  name
179     0       7634944 mmcblk0
179     1       2048    mmcblk0p1
179     2       2048    mmcblk0p2
179     3       2048    mmcblk0p3
179     4       10240   mmcblk0p4
179     5       10240   mmcblk0p5
179     6       2048    mmcblk0p6
179     7       2048    mmcblk0p7
259     0       2048    mmcblk0p8
259     1       2048    mmcblk0p9
259     2       20480   mmcblk0p10
259     3       40960   mmcblk0p11
259     4       20480   mmcblk0p12
259     5       2048    mmcblk0p13
259     6       51200   mmcblk0p14
259     7       102400  mmcblk0p15
259     8       716800  mmcblk0p16
259     9       819200  mmcblk0p17
259     10      5826560 mmcblk0p18
179     24      512     mmcblk0rpmb
179     16      4096    mmcblk0boot1
179     8       4096    mmcblk0boot0
8       0       3872256 sda

========>  Can't get Udisk from /proc/partitions, so add default(sda1) Udisk table

usbmajor=/dev/block/sda,  usbminor=  name=sda
recovery filesystem table
=========================
  0 /fastboot emmc /dev/block/platform/soc/by-name/fastboot 0
  1 /bootargs emmc /dev/block/platform/soc/by-name/bootargs 0
  2 /recovery emmc /dev/block/platform/soc/by-name/recovery 0
  3 /baseparam emmc /dev/block/platform/soc/by-name/baseparam 0
  4 /logo emmc /dev/block/platform/soc/by-name/logo 0
  5 /fastplay emmc /dev/block/platform/soc/by-name/fastplay 0
  6 /boot emmc /dev/block/platform/soc/by-name/kernel 0
  7 /userapi emmc /dev/block/platform/soc/by-name/userapi 0
  8 /hibdrv emmc /dev/block/platform/soc/by-name/hibdrv 0
  9 /pqparam emmc /dev/block/platform/soc/by-name/pqparam 0
  10 /misc emmc /dev/block/platform/soc/by-name/misc 0
  11 /system ext4 /dev/block/platform/soc/by-name/system 0
  12 /data ext4 /dev/block/platform/soc/by-name/userdata 0
  13 /cache ext4 /dev/block/platform/soc/by-name/cache 0
  14 /private ext4 /dev/block/platform/soc/by-name/private 0
  15 /backup ext4 /dev/block/platform/soc/by-name/backup 0
  16 /tmp ramdisk ramdisk 0
  17 /sdcard auto /dev/block/sda1 0


[287] boot.command =
[288] boot.recovery =
[289] boot.status =

E:fail to open [/cache/recovery/uuid]
locale is [zh_CN]
failed to read font: res=-1
can't open /dev/tty0: No such file or directory
====== GGL_PIXEL_FORMAT_RGB_565
framebuffer: fd 15 (1280 x 720)
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
       installing_text: zh_CN (240 x 38 @ 1818)
          erasing_text: zh_CN (128 x 38 @ 1521)
       no_command_text: zh_CN (92 x 38 @ 1521)
            error_text: zh_CN (98 x 38 @ 1521)
            error_text: zh_CN (98 x 38 @ 1521)
intent:(null)
Warning: No file_contexts
Command: "/sbin/recovery"

ro.sf.lcd_density=160
ro.adb.secure=1
ro.com.android.dateformat=MM-dd-yyyy
ro.com.widevine.cachesize=16777216
ro.drm.tee=false
ro.sys.apkcontrol.mode=none
ro.fuse.support=false
ro.wifi.channels=
ro.allow.mock.location=1
ro.board.platform=bigfish
ro.build.id=KOT49H
ro.build.date=Sat Dec  7 11:26:43 CST 2019
ro.build.date.utc=1575689203
ro.build.host=join-r730-00
ro.build.tags=test-keys
ro.build.type=eng
ro.build.user=proj-gdY-GDYD__121135
ro.build.display.id=CMCC_M301H_1ZN9_GD50_20191207_1126
ro.build.product=Hi3798MV300H
ro.build.version.sdk=19
ro.build.version.release=4.4.2
ro.build.version.codename=REL
ro.build.description=Hi3798MV300-eng 4.4.2 KOT49H eng.proj-gdY-GDYD__121135.20191207.112525 test-keys
ro.build.fingerprint=M301H_1ZN9_GD50/M301H_1ZN9_GD50/M301H_1ZN9_GD50:4.4.2/KOT49H/3.0.3:eng/test-keys
ro.build.characteristics=tablet
ro.dolby.dmacert.enable=false
ro.dolby.dvbcert.enable=false
ro.dolby.iptvcert.enable=false
ro.pmqos.enable=true
ro.config.low_ram=false
ro.config.ringtone=Ring_Synth_04.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.config.tde_compose=true
ro.config.notification_sound=pixiedust.ogg
ro.decode.cap.h264=4Kp30
ro.decode.cap.h265=4kp60
ro.encode.cap.h264=1080p30
ro.encode.cap.h265=1080p30
ro.kernel.android.checkjni=false
ro.secure=0
ro.bt_init.enable=false
ro.carrier=unknown
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.mem.size=1g
ro.product.name=Hi3798MV300H
ro.product.board=bigfish
ro.product.brand=M301H_1ZN9_GD50
ro.product.model=M301H_1ZN9_GD50
ro.product.device=Hi3798MV300H
ro.product.locale.region=CN
ro.product.locale.language=zh
ro.product.target=telecom
ro.product.manufacturer=CMCC
ro.baseband=unknown
ro.bootmode=unknown
ro.hardware=bigfish
ro.hwcursor.fb=/dev/graphics/fb2
ro.opengles.version=131072
ro.revision=0
ro.serialno=
ro.playready.tee=false
ro.toastshow.enable=false
ro.bootloader=unknown
ro.debuggable=1
ro.lockscreen.disable.default=true
ro.thirdparty.dhcp=false
ro.factorytest=0
ro.mediaScanner.enable=false
ro.defaultStorage.enable=true
drm.client.enabled=false
drm.service.enabled=true
drm.widevine.debug=false
gsm.version.baseband=HiSTBAndroidV600R003C01SPC032
net.bt.name=Android
net.change=net.bt.name
sys.qb.reload=load_persist_props
init.svc.adbd=running
init.svc.console=running
init.svc.ueventd=running
init.svc.recovery=running
qemu.hw.mainkeys=0
wifi.interface=wlan0
debug.hwui.render_dirty_regions=false
multi.dev.select=1
dalvik.vm.heapsize=256m
dalvik.vm.heapmaxfree=32m
dalvik.vm.heapminfree=512k
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=192m
dalvik.vm.stack-trace-file=/data/anr/traces.txt
dalvik.vm.heaptargetutilization=0.5
persist.sys.ui.hw=true
persist.sys.ctc.errcover.fast=0
persist.sys.ctc.errcover.seek=0
persist.sys.ctc.errcover.fisfrm=20
persist.sys.ctc.errcover.resume=0
persist.sys.ctc.errcover.spfast=0
persist.sys.ctc.quickoutput=1
persist.sys.ctc.presynctimeout=0
persist.sys.usb.config=adb
persist.sys.win.switch.black=true
persist.sys.cvbs.and.hdmi=false
persist.sys.hdmi.cec=true
persist.sys.ipv6.disable=0
persist.sys.media.uvmos=true
persist.sys.samba.status=true
persist.sys.video.cVRs=0
persist.sys.video.adaptformat=false
persist.sys.access.internal=false
persist.sys.dalvik.vm.lib=libdvm.so
persist.sys.player.cache.low=200
persist.sys.player.cache.high=5300
persist.sys.player.cache.type=time
persist.sys.player.cache.total=20000
persist.sys.player.avsync.min=500
persist.sys.player.buffer.seek=0
persist.sys.player.leftbuf.min=10
persist.sys.player.bufmaxsize=80
persist.sys.zygote.optimize=false
persist.sys.hdrmode=-1
persist.sys.preload.fork=true
persist.sys.activity.constss=/system/media/blank.png
persist.sys.bootanim.enable=false
persist.sys.bootanim.compeleted=true
persist.sys.ethernet.status=eth0_on
persist.sys.fastplay.fullyplay=false
persist.sys.hiplayer.vo.freeze=false
persist.sys.hiplayer.rtspusetcp=false
persist.sys.timezone=Asia/Shanghai
persist.sys.doublenet=false
persist.sys.imeswitch.key=18
persist.sys.laterscan.enable=false
persist.sys.optimalfmt.enable=1
persist.sys.optimalfmt.perfer=native
persist.sys.softdetector.enable=false
persist.sys.capgetfailflag=-1
persist.sys.colorspacesettype=-1
persist.sys.screenorientation=landscape
persist.hdmi.suspend.time=0
persist.wifi.checkinternet=false
persist.karaoke.enable=true
persist.low_ram.wp.enable=false
persist.suspend.mode=deep_restart
persist.ethernet.vlan.area=none
persist.ethernet.vlan.enabled=false
persist.ethernet.vlanid=0
persist.ethernet.doublestack=false
persist.ethernet.wifidisguise=false
service.media.hiplayer.output=sideband
hibrowser.default.fullscreen=true

prompt_and_wait - status:0
I:Saving locale "zh_CN"
force update !!!!!
I:find update.zip
I:find update.zip in /dev/block/sda
I:the new sdcard device is  "/dev/block/sda", and the new fstype is "auto"

-- Install /sdcard/update.zip ...
not find zip in /sdcard/update.zip ...
ret is -1
Finding update package...
I:Update location: /sdcard/update.zip
Opening update package /sdcard/update.zip ...
I:read key e=65537 hash=20
I:1 key(s) loaded from /res/keys
Verifying update package...
I:comment is 1738 bytes; signature 1720 bytes from end
I:failed to verify against key 0
E:failed to verify whole-file signature
I:verify_file returned 1
E:signature verification failed
Installation aborted.
I:Saving locale "zh_CN"
Rebooting...
reboot: Restarting system with command ''

Bootrom start
Boot Media: eMMC (Default Speed)
Decrypt auxiliary code ...OK

lsadc voltage min: 000003F6, max: 000003FF, aver: 000003FC, index: 00000000

Enter boot auxiliary code

Auxiliary code - v1.00
DDR code - V1.1.2.1 20171011
Build: Sep 11 2018 - 19:55:16

Reg Version:  v1.5.2\
Reg Time:     2018/11/06 09:16:29
Reg Name:     hi3798m3hdms1_hi3798mv300h_DDR3-1866_1GB_16bitx2_2layers.re?5

Set cpu freq

Boot auxiliary code success
Bootrom success


System startup


Relocate Boot

Jump to C code


Fastboot 3.3.0 (proj-gdY-GDYD__121135@join-r730-00) (May 06 2020 - 19:58:42)

Fastboot:      Version 3.3.0
Build Date:    May  6 2020, 19:59:28
CPU:           Hi3798Mv310
Boot Media:    eMMC
DDR Size:      1GB

Found flash memory controller hifmc100.
no found nand device.

MMC/SD controller initialization.
scan edges:2 p2f:6 f2p:8
mix set temp-phase 3
scan elemnts: startp:120 endp:114
Tuning SampleClock. mix set phase:[03/07] ele:[12/15]
MMC/SD Card:
    MID:         0x15
    Read Block:  512 Bytes
    Write Block: 512 Bytes
    Chip Size:   7456M Bytes (High Capacity)
    Name:        "8GTF4R"
    Chip Type:   MMC
    Version:     5.1
    Speed:       100000000Hz
    Mode:        HS400
    Voltage:     1.8V
    Bus Width:   8bit
    Boot Addr:   0 Bytes
Net:   up

Boot Env on eMMC
    Env Offset:          0x00200000
    Env Size:            0x00010000
    Env Range:           0x00010000


SDK Version: HiSTBAndroidV600R003C01SPC031_patch5

bootargs RECOVERY_CHECK_MODE=no_ipanel_ir
serialno:00500300000299103101086BD1D7254D
properties mac match step1.
properties mac=08:6B:D1:D7:25:4D.
mac:08:6B:D1:D7:25:4D
Reserve Memory
    Start Addr:          0x3FFFE000
    Bound Addr:          0x8D8F000
    Free  Addr:          0x3F18D000
    Alloc Block:  Addr         Size
                  0x3FBFD000   0x400000
                  0x3F8FC000   0x300000
                  0x3F8F9000   0x2000
                  0x3F878000   0x80000
                  0x3F876000   0x1000
                  0x3F775000   0x100000
                  0x3F773000   0x1000
                  0x3F672000   0x100000
                  0x3F51F000   0x152000
                  0x3F199000   0x385000
                  0x3F197000   0x1000
                  0x3F18D000   0x9000

Press Ctrl+C to stop autoboot

MMC read: dev # 0, block # 192512, count 20480 ... 20480 blocks read: OK

175793991 Bytes/s

Found Initrd at 0x04000000 (Size 350542 Bytes), align at 16384 Bytes

## Booting kernel from Legacy Image at 01ffffc0 ...
   Image Name:   Linux-3.18.24_hi3798mv310
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    8613452 Bytes = 8.2 MiB
   Load Address: 02000000
   Entry Point:  02000000
   XIP Kernel Image ... OK
OK
ATAGS [0x00000100 - 0x00000510], 1040Bytes

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
hi_eth: hieth_mdiobus_read,73:mdio busy
hi_eth: no dev probed!
init: /init.bigfish.rc: 55: invalid command 'getprop'
init: /init.bigfish.rc: 114: invalid option 'sdcard_r'
init: /init.bigfish.rc: 239: invalid option '//add'
init: /init.bigfish.rc: 395: invalid command '//insmod'
init: /dev/hw_random not found
init: cannot open '/initlogo.rle'
init: /dev/hw_random not found
healthd: wakealarm_init: timerfd_create failed
init: cannot find '/system/bin/rild', disabling 'ril-daemon'
init: cannot find '/system/bin/dbus-daemon', disabling 'dbus'
init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
init: cannot find '/system/bin/teecd', disabling 'teecd'
init: cannot find '/system/bin/frontPanel', disabling 'frontPanel'
init: cannot find '/system/bin/mtkbt', disabling 'blueangel'
init: cannot find '/system/bin/dtvserver', disabling 'dtvserver'
init: cannot find '/system/bin/usb-driver', disabling 'usb-driver'
healthd: No charger supplies found
init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
init: powerctl: cannot expand '${sys.powerctl}'
init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'
root@Hi3798MV300H:/ # init: sys_prop: permission denied uid:1000  name:ro.config.gfx2d_compose
sd 0:0:0:0: [sda] No Caching mode page found
sd 0:0:0:0: [sda] Assuming drive cache: write through
init: untracked pid 2228 exited
init: untracked pid 1115 exited
init: untracked pid 3044 exited
init: untracked pid 3325 exited
init: untracked pid 3587 exited
init: untracked pid 3844 exited
init: untracked pid 4090 exited





上一篇:急求四川電信EC6108V9(1+4G)CA版盒子線刷包
下一篇:湖南版M401A 2+8G S905L3A TTL備份原機分區問題請教
沙發
 樓主| 發表于 2023-3-21 14:29 | 只看該作者 | 來自廣東
QQ846162.4 發表于 2023-3-21 13:21
鏈接: https://pan.baidu.com/s/1ASZKMuTY7ThALaRUbIk8eg?pwd=474x

里面061-廣東移動M301H_ZN,hi3798mv31 ...

謝謝,刷了還是一樣,可能我的盒子有問題了?
板凳
 樓主| 發表于 2023-3-21 19:03 | 只看該作者 | 來自廣東
廣東移動送的盒子M301H,線刷再卡刷都可以,但開不了機 廣東移動送的盒子M301H,線刷再卡刷都可以,但開不了機
求磚包刷機包!?。。。?br />

地板
發表于 2024-6-29 16:15 | 只看該作者 | 來自廣東
怎么刷的?短接點在哪里?

本版積分規則

Archiver|新帖|標簽|軟件|Sitemap|ZNDS智能電視網 ( 蘇ICP備2023012627號 )

網絡信息服務信用承諾書 | 增值電信業務經營許可證:蘇B2-20221768 丨 蘇公網安備 32011402011373號

GMT+8, 2024-11-20 16:40 , Processed in 0.074628 second(s), 13 queries , Redis On.

Powered by Discuz!

監督舉報:report#znds.com (請將#替換為@)

© 2007-2024 ZNDS.Com

快速回復 返回頂部 返回列表