廣東電信華為悅盒子EC6108V9U_pub　TTL跑馬后輸入不了命令！

dcx6210124 · 發表于 2018-1-28 16:03

廣東電信華為悅盒子EC6108V9U_pub　TTL跑馬后輸入不了命令！請問大神們怎么解決？謝謝！！附提示如下：
Boot Env on eMMC
Env Offset:       0x00100000
Env Size:          0x00010000
Env Range:          0x00010000
HI_OTP_LockIdWord,327: ID_WORD have already been locked

SDK Version: HiSTBAndroidV600R001C00SPC065_v2016113014

HI_Flash_Read Ret= 2048
HI_Flash_Read Ret= 2048
HMT_read_bootlogo_count, bootlogo_count=0
HMT_write_bootlogo_count, bootlogo_count=1
base:0x3200000, offset:0x600000, bytes:0x800
fastboot_flash_write
BaseAddress:0x3200000, DataSize:0x700000, offset:0x600000, bytes:0x800
Flash write result:0x800
start detecting key1...
get key1 value  0x0
HI_Flash_Read Ret= 3072
HI_Flash_Read Ret= 3072
HI_Flash_Read Ret= 8912896
HI_Flash_Read Ret= 8912896

XIP Kernel Image ... OK
OK
kernel loaded at 0x02000000, end = 0x02782a10
initrd rd_start = 4e00000,rd_end = 4e502ae
HMT_write_bootlogo_count, bootlogo_count=0
base:0x3200000, offset:0x600000, bytes:0x800
fastboot_flash_write
BaseAddress:0x3200000, DataSize:0x700000, offset:0x600000, bytes:0x800
Flash write result:0x800

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
libphy: PHY himii:1f not found
init: /init.bigfish.rc: 115: invalid option 'sdcard_r'
init: /dev/hw_random not found
init: cannot open '/initlogo.rle'
init: read misc boot info 1088/1088 bytes.
init: mount system image fail 0 times.
init: init: /system/bin/e2fsck
init: init: -v
init: init: -f
init: init: -y
init: init: /dev/block/mmcblk0p16
init: init: result is 256
init: /dev/hw_random not found
init:
stb-1 8V9 typeinit: cannot find '/system/bin/rild', disabling 'ril-daemon'
healthd: No charger supplies found
init: cannot find '/system/bin/dbus-daemon', disabling 'dbus'
init: cannot find '/system/bin/basicService', disabling 'basicService'
init: cannot find '/system/bin/mtkbt', disabling 'blueangel'
init: cannot find '/system/bin/dtvserver', disabling 'dtvserver'
init: cannot find '/system/bin/usb-driver', disabling 'usb-driver'
init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
init: powerctl: cannot expand '${sys.powerctl}'
init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'

aoanor · 發表于 2018-1-28 20:23

看提示是類似找不到文件和寫入失敗。確認下文件是否齊全

高樂高_(dá)UR9E5 · 發表于 2018-10-23 17:19

樓主后面找到辦法了嗎？我現在也是這情況！

dcx6210124 · 發表于 2018-10-23 17:20

高樂高_(dá)UR9E5 發表于 2018-10-23 17:19
樓主后面找到辦法了嗎？我現在也是這情況！

adb鎖了，只能直接刷機！

大舌妹 · 發表于 2018-12-18 21:32

MGV2000還不跑馬

魯西南衛星 · 發表于 2018-12-28 12:09

只能用線刷包，直接刷。
定制盒子很難找到線刷包。

liuhuan22 · 發表于 2019-2-16 17:40

HI_OTP_LockIdWord,327: ID_WORD have already been locked

have already been locked

vtdxsfy · 發表于 2019-12-6 09:36

如何接TTL跑馬

lionking77 · 發表于 2020-2-21 17:51

樓主怎么解決了是否已經解決呢如果解決了麻煩給下方法謝謝

› 你問我答 / 玩機教程 / 固件 › ZNDS刷機/救磚